0.789 Gravity Colorless No Clean Liquid Flux Soldering Flux For Electronics Wave Soldering

Place of Origin China
Brand Name Wuxi Top Chemical
Certification ISO9001
Model Number X-215
Minimum Order Quantity 10 tons
Price Call/negotiable
Packaging Details 1 container
Delivery Time 5-8 days
Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability 500 tons/month

Contact me for free samples and coupons.

Whatsapp:0086 18588475571

Wechat: 0086 18588475571

Skype: sales10@aixton.com

If you have any concern, we provide 24-hour online help.

x
Product Details
Product Name No-clean Liquid Flux Exterior Color Colorless And Transparent
Advantage Highly Active Specific Gravity (g/ml) 0.795±0.006
Closed Flash Point 13℃ Recommended Thinner X-C Thinner
Acid Value (mg KOH/g) 21±3 Storage Time 12 Months
High Light

0.789 gravity No Clean Liquid Flux

,

colorless No Clean Liquid Flux

,

liquid soldering flux for electronics

Leave a Message
Product Description

No-clean liquid flux colorless transparent, environmentally friendly flux suitable for wave soldering special flux

 

1. Instructions for use
* In order to meet the requirements of stable welding performance and electrical performance reliability, the process establishment related to circuit boards and components must meet the requirements of weldability and ion clarity. It is recommended that the assembler put forward relevant regulations for the suppliers of related materials, and require the incoming material analysis certificate or the assembler to carry out incoming material inspection.
* During the assembly process, handle the circuit board carefully. Only grasp the edge of the circuit board. It is recommended to use clean, lint-free gloves.
* Use X-C thinner to clean the conveyor belt, chain teeth and clamps regularly to avoid the increase of residues on the edge of the circuit board after assembly.
* When changing the type of flux, use X-C thinner to thoroughly clean the flux container, flux tank, flux spray system, etc.
* The density and uniformity of the flux coating are critical to the successful application of no-clean fluxes. It is recommended to use flux coatings with a density of 500 to 1500 micrograms per square inch.
* Preheating makes the flux on the circuit board dry, enhancing the removal of oxides and the formation of good solder joints. The preheating temperature depends on various factors, such as conveyor speed, types of devices and substrates.
* When foam coating is used, compressed air with degreasing and dewatering should be used to foam, so that sufficient flux can be maintained on the foam core. Use a pressure regulator to adjust the air pressure to produce uniform bubbles and optimal height.
* The flux applicator needs to add a thinner to compensate for the loss of evaporation and maintain the balance of the flux composition.
* Debris and contaminants will accumulate in the flux coating of the loop. For the consistency of the soldering operation, the no longer used flux should be disposed of regularly. After emptying the flux, use the thinner to clean the container and other tasks, and then fill the container with fresh flux. The flux should be given a few minutes of foaming stability before the soldering can be resumed.

 

 

 

2. Technical indicators

Parameter Typical Value Parameter Typical Value
Exterior color Colorless and transparent Advantage Higher activity
Solid content (w/w)% 2.5±0.5 water solubility Acid value (mg KOH/g) 21±3
Specific gravity (g/ml) 0.795±0.006 Insulation resistance (85℃/85%RH) >1×108Ω
Cl- content (W/W)% not detected Resistivity 35000Ω·cm
Closed flash point 13℃ Storage time 12 months

                                                                                                                    

 3.  No-clean flux picture                                                                                                                                                         

 0.789 Gravity Colorless No Clean Liquid Flux Soldering Flux For Electronics Wave Soldering 0